Running wires through the tower

[Esquire]

I am thinking about installing some lights on those nifty little tabs on the top of my tower on a 36 Con. Anyone have suggestions on how to run the wires through the tubing from the lights to the helm?

[Maximillion]

Esquire,

The best way to do it is by running wires to the back of the bridge on the port side. Right next to the console is a delrin cover that is a decorative piece to cover the bracket that holds the bridge to the house. If you remove that then you will see the wires that run into the aluminum for the all around light. That tube will be hollow all the way to the top of the aluminum frame. There may even be a chase wire already there for the spreader light option.

If not, you have to chase a wire to the top first before making the turn to go to the pads that are welded there.

Hope this helps.